LunarDoggo.StartOptions 1.1.0-preview.20220411

StartOptions

Library for parsing commandline start options for .net and .net-core applications (.net-standard 1.3)

Terminology

A StartOption is a single commandline argument that may contain values. StartOptions can either be grouped by StartOptionGroups or be groupless and can therefore be used for global flags, such as verbose or debug.

A StartOptionGroup is a grouping of StartOptions, it has a specific name associated with it. The StartOptionGroup commandline argument always is of type Switch, it additionally requires at least one subordinate StartOption to be defined. Also note that you can only use one StartOptionGroup at once when calling your application.

A StartOptionParser takes the commandline arguments and parses them into an optional StartOptionGroup and StartOptions which you can use to determine the inputs from the cli. If you use either of the two approaches mentioned in the section Getting started you don't need to use this class.

AbstractApplication is a base type that creates a StartOptionParser, passes your application's commandline arguments to it and handles its output using the builder-approach mentioned below. You must override the following methods:

//Prints your help-page if the commandline arguments containes a HelpOption
protected abstract void PrintHelpPage(StartOptionParserSettings settings, IEnumerable<HelpOption> helpOptions, IEnumerable<StartOptionGroup> groups, IEnumerable<StartOption> grouplessOptions);

//Runs your application code with the parsed StartOptionGroup and groupless StartOptions
protected abstract void Run(StartOptionGroup selectedGroup, IEnumerable<StartOption> selectedGrouplessOptions);

//Gets the ApplicationStartOptions for the StartOptionParser-creation
protected abstract ApplicationStartOptions GetApplicationStartOptions();

CommandApplication is a base type that does the same thing as AbstractApplication, but with the attribute-based approach mentioned below. You must override the following methods:

//Prints your help-page if the commandline arguments containes a HelpOption
protected abstract void PrintHelpPage(StartOptionParserSettings settings, IEnumerable<HelpOption> helpOptions, IEnumerable<StartOptionGroup> groups, IEnumerable<StartOption> grouplessOptions);

//Get the types of all commands your appllication supports
protected abstract Type[] GetCommandTypes();

ApplicationStartOptions is a container used by an AbstractApplication or a CommandApplication in order to provide the StartOptionParser with its parameters. It is just a simple container for StartOptionGroups, groupless StartOptions, HelpOptions and StartOptionParserSettings

Getting started

This library provides two ways for you to let you customize your application's command line arguments:

• by utilizing Attributes
• by builsing the StartOptions yourself

1. Using the attribute-based approach

If you chose the attribute-based approach, first create some classes that implement the interface IApplicationCommand, make sure to define at least one constructor per class that is decorated with the StartOptionGroupAttribute and only contains parameters that are decorated with the StartOptionAttribute. The method Execute() contains the code that will run the command:

public class AddCommand : IApplicationCommand
{
    private readonly int firstValue, secondValue;

    [StartOptionGroup("add", "a", Description = "Adds two integers together")]
    public AddCommand([StartOption("value-1", "1", Description = "First value", Mandatory = true, ValueType = StartOptionValueType.Single, ParserType = typeof(Int32OptionValueParser))] int firstValue,
                        [StartOption("value-2", "2", Description = "Second value", Mandatory = true, ValueType = StartOptionValueType.Single, ParserType = typeof(Int32OptionValueParser))] int secondValue)
    {
        this.secondValue = secondValue;
        this.firstValue = firstValue;
    }

    public void Execute()
    {
        Console.WriteLine("{0} + {1} = {2}", this.firstValue, this.secondValue, this.firstValue + this.secondValue);
    }
}

After you created all the commands you want to use, create a new class that inherits from CommandApplication and override its abstract methods:

class DemoApplication : CommandApplication

Set the commands the application will be able to run, all available command line arguments will be extracted from:

protected override Type[] GetCommandTypes()
{
    return new[] { typeof(AddCommand), typeof(ReadFileCommand) };
}

And implement the method that will print the help page of your application:

protected override void PrintHelpPage(StartOptionParserSettings settings, IEnumerable<HelpOption> helpOptions, IEnumerable<StartOptionGroup> groups, IEnumerable<StartOption> grouplessOptions)
{
    new ConsoleHelpPrinter('\t').Print(settings, helpOptions, groups, grouplessOptions);
}

2. Using StartOptionGroup- and StartOption-builders

If you picked the builder-based approach, create a new class that inherits from AbstractApplication and override its abstract methods:

class DemoApplication : AbstractApplication

Set your ApplicationStartOptions inside of GetApplicationStartOptions, note that valid StartOption names must start with either a letter or a number and can only contain letters, numbers, underscores and hyphens/dashes. Also note, that you can also provide custom HelpOptions and StartOptionParserSettings in this method (see Demo-Project):

protected override ApplicationStartOptions GetApplicationStartOptions()
{
    StartOptionGroup[] groups = new StartOptionGroup[]
    {
        new StartOptionGroupBuilder("add", "a").SetDescription("Adds two integers together")
                .AddOption("value-1", "1", (_option) => _option.SetDescription("First value").SetValueType(StartOptionValueType.Single).SetValueParser(new Int32OptionValueParser()).SetRequired())
                .AddOption("value-2", "2", (_option) => _option.SetDescription("Second value").SetValueType(StartOptionValueType.Single).SetValueParser(new Int32OptionValueParser()).SetRequired())
                .Build()
    };
    
    StartOption[] grouplessOptions = new StartOption[]
    {
        new StartOptionBuilder("verbose", "v").SetDescription("Enable verbose output").Build()
    };
    
    return new ApplicationStartOptions(groups, grouplessOptions);
}

Set the logic for printing help-pages inside of PrintHelpPage. You can use the predefined class ConsoleHelpPrinter or define your own method of displaying a help page to your user:

protected override void PrintHelpPage(StartOptionParserSettings settings, IEnumerable<HelpOption> helpOptions, IEnumerable<StartOptionGroup> groups, IEnumerable<StartOption> grouplessOptions)
{
    new ConsoleHelpPrinter('\t').Print(settings, helpOptions, groups, grouplessOptions);
}

Set the logic of the execution of your application inside of Run:

protected override void Run(StartOptionGroup selectedGroup, IEnumerable<StartOption> selectedGrouplessOptions)
{
    if(selectedGrouplessOptions.Any(_option => _option.ShortName.Equals("v")))
    {
        Console.WriteLine("Verbose option was toggled");
    }

    switch(selectedGroup.ShortName)
    {
        case "a":
            StartOption firstOption = group.GetOptionByShortName("1");
            StartOption secondOption = group.GetOptionByShortName("2");

            if (firstOption.HasValue && secondOption.HasValue)
            {
                int first = firstOption.GetValue<int>();
                int second = secondOption.GetValue<int>();

                Console.WriteLine("{0} + {1} = {2}", first, second, first + second);
            }
            else
            {
                if (!firstOption.HasValue)
                {
                    Console.WriteLine("Please provide the first number for the addition");
                }
                if(!secondOption.HasValue)
                {
                    Console.WriteLine("Please provide the second number for the addition");
                }
            }
            break;
        default: throw new NotImplementedException();
    }
}

Regardless of whether you chose the attribute-based or builder-based approach, you must finally instantiate your application class in the Main(string[] args)-method and call the Run(string[] args)-method on your application class:

static void Main(string[] args)
{
    DemoApplication application = new DemoApplication();
    application.Run(args);
}

Afterwards you will be able to call your application from the commandline like so:

/> .\DemoApplication.exe --add -1=10 -2=5 --verbose -h

In this example, your application will be using the "add"-StartOptionGroup with the subordinate StartOptions "value-1" (value = 10) and "value-2" (value = 5), the verbose-flag is set. As the HelpOption "h" is also used, your application will display the help-page for the provided commandline arguments without actually executing the operation, in order to run the addition, just omit the "-h" option.

Final notes and hints

1. Please note, that the help printer by default only displays all options if your commandline arguments only contained HelpOptions if they contained StartOptions or StartOptionGroups, the help page will only contain descriptions to the provided options. To change this behaviour, override the following Method in your Application-class:

protected override void PrintHelpPage(ParsedStartOptions parsed)
{
    //The following four lines assume, that you defined methods for getting your StartOptionParserSettings, StartOptionGroups, StartOptions and HelpOptions
    StartOptionParserSettings settings = this.GetStartOptionParserSettings();
    IEnumerable<StartOptionGroup> groups = this.GetStartOptionGroups();
    IEnumerable<HelpOption> helpOptions = this.getHelpOptions();
    IEnumerable<StartOption> options = this.GetStartOptions();

    this.PrintHelpPage(settings, helpOptions, groups, options);
}

2. If you wish to parse command line arguments in the command-based approach that are not of type string, you must specify the parser a StartOption should use to parse its values:

[StartOptionGroup("add", "a", Description = "Adds two integers together")]
public AddCommand([StartOption("value-1", "1", Description = "First value", Mandatory = true, ValueType = StartOptionValueType.Single, ParserType = typeof(Int32OptionValueParser))] int firstValue,
                    [StartOption("value-2", "2", Description = "Second value", Mandatory = true, ValueType = StartOptionValueType.Single, ParserType = typeof(Int32OptionValueParser))] int secondValue)
{
    this.secondValue = secondValue;
    this.firstValue = firstValue;
}

3. If you wish to implement a custom IStartOptionValueParser with the command-based approach you must register your custom parser in the StartOptionValueParserRegistry before using it:

class CustomOptionValueParser : AbstractStartOptionValueParser
{
    ...
}

static void Main(string[] args)
{
    StartOptionValueParserRegistry.Register(new CustomOptionValueParser());
    DemoApplication application = new DemoApplication();
    application.Run(args);
}

4. If you wish to use the same groupless StartOption with the command-based approach across multiple different constructors or classes, make sure that the StartOptionAttribute of each instance of the same parameter is defined in exactly the same way (every value specified in the attribute has to be exactly the same!):

class FirstCommand : ApplicationCommand
{
    [StartOptionGroup("first", "f")]
    public FirstCommand(..., [StartOption("verbose", "v", Description = "Enable verbose output", IsGrouplessOption = true)]bool verbose)
    {
        ...
    }
    ...
}

class SecondCommand : ApplicationCommand
{
    [StartOptionGroup("second", "s")]
    public SecondCommand(..., [StartOption("verbose", "v", Description = "Enable verbose output", IsGrouplessOption = true)]bool verbose)
    {
        ...
    }
    ...
}