froxy 0.3.1

Froxy

A cross-platform command line utility for implementing a forward (classic) and reverse proxy server based on .NET. It supports forwarding any HTTPS traffic (CONNECT requests) for forward proxying and TCP, UDP or HTTP/HTTPS (GET and POST requests are supported) protocols for implementing a reverse proxy server.

💁 For what?

What tasks does a reverse proxy server solve:

• Security, since the client does not have direct access to the target machine where the application is running, for example, a web server.

• If your Web application or API server does not support authorization, then you can use Base64 encryption, which requires transmitting authorization data in the request header for all clients that will connect via Proxy. If you use a browser, then a corresponding form for passing basic authorization will be provided.

• Unlike the classic Proxy, you do not need to specify the proxy server address on the client side in the application settings or change the code and use external modules (for example, proxy-agents) for each request via the API client, but only change the url to the proxy server address.

• If you use a VPN service to access a specific URL on the Internet via the HTTP or HTTPS protocols on your machine, you can provide access to it to other machines on the network, without having to install and use VPN on other clients (for example, on mobile devices the Proxy server address can be specified in the Wi-Fi connection configuration).

• Provide direct access to other hosts in the second subnet, if you use a VPN server in point-to-point mode (for example, Radmin).

• The ability to provide access to an external client in the DMZ (Demilitarized Zone) to applications that are located on the internal network, for example, for the RTSP, SSH, RDP, Syslog protocols, etc., it is enough to install a proxy with network access to both subnets and provide access through it only to selected applications on different hosts.

• Can act as an alternative to setting up classic ssh tunneling, like in OpenSSH, Putty and others.

There are many alternatives that provide similar functionality separately. For example, ncat on Windows (from nmap), socat on Linux for TCP or ReverseProxy on Golang for redirecting HTTP/HTTPS traffic. All of the above functionality is implemented in one utility.

🚀 Installation

💻 Windows

• Download and install .NET application runtime version 8.0.

• Download portable version executable from GitHub repository.

🐧 Linux

• Install the .NET Application Runtime:

sudo apt-get install -y dotnet-runtime-8.0

• Download the froxy executable file to the /usr/local/bin/ directory and grant execution permissions:

sudo curl -s -L https://github.com/Lifailon/froxy/releases/download/0.3.0/froxy-0.3.0-linux-x64 -o /usr/local/bin/froxy
sudo chmod +x /usr/local/bin/froxy

💡 Tested on Ubuntu system.

No dependency installation

If you don't want to install the .NET runtime, you can download a zip archive of the self-contained version, which already contains all the dependencies (available for both platforms).

📦 NuGet

You can install the application from the package manager NuGet:

dotnet tool install --global froxy  

After installation, the application will be available as a froxy executable from any location on the system.

Package the application for publication on NuGet:

dotnet pack

🔨 Build

• Clone the repository:

git clone https://github.com/Lifailon/froxy
cd froxy/source

• Build and run the application:

dotnet build && dotnet run [parameters]

• Build the application into one executable file:

Windows:

dotnet publish -r win-x64 -c Release /p:PublishSingleFile=true

Linux:

dotnet publish -r linux-x64 -c Release /p:PublishSingleFile=true

• Build a self-contained application (without the need to install .NET platform dependencies on the executable system):

Windows:

dotnet publish -r win-x64 -c Release --self-contained true

Linux:

dotnet publish -r linux-x64 -c Release --self-contained true

🐳 Docker

Download the built image from DockerHub:

docker pull lifailon/froxy:latest

To build a container image from project source files, use dockerfile:

docker build -t lifailon/froxy .

To pre-build the application (if this has not been done previously on the local system), use dockerfile-pre-build:

docker build -t lifailon/froxy -f dockerfile-pre-build .

An example of running a classic proxy server on port 8080 using authorization in the container:

port=8080
docker run -d \
    --name froxy \
    -e FORWARD=$port \
    -e LOCAL="" \
    -e REMOTE=""\
    -e USER="admin"\
    -e PASSWORD="admin"\
    -p $port:$port \
    --restart=unless-stopped \
    lifailon/froxy

If you plan to use a reverse proxy, set the value to FORWARD=0, passing the values to the LOCAL and REMOTE variables instead. If authorization is not required, then pass the value false to the USER and PASSWORD parameters.

An example of starting a reverse proxy server without authorization:

port=8443
docker run -d \
    --name froxy \
    -e FORWARD="0" \
    -e LOCAL="*:$port" \
    -e REMOTE="https://kinozal.tv" \
    -e USER="false" \
    -e PASSWORD="false" \
    -p $port:$port \
    --restart=unless-stopped \
    lifailon/froxy

You can run multiple instances of the application at the same time, example docker-compose to redirect to some popular torrent trackers:

docker-compose -f docker-compose.yml up -d

To stop all running services:

docker-compose down

📑 Usage

Get Help:

froxy --help

Forward and reverse proxy server base on .NET.

Parameters:
  -h, --help                       Get help.
  -v, --version                    Get version.
  -f, --forward <port>             Start proxy server forwarding HTTPS traffic (CONNECT method) via port selected in the 1024-49151 range.
  -l, --local <port/address:port>  The interface address and port for TCP or only the port for UDP, through which proxy requests will pass.
  -r, --remote <address:port/url>  TCP/UDP or HTTP/HTTPS (GET and POST methods) address of the remote resource to which requests will be proxy.
  -u, --user <login>               User name for authorization (supported for forward and reverse HTTP/HTTPS protocols only).
  -p, --pass <password>            User password for authorization.

Examples:
  froxy --forward 8080
  froxy --forward 8080 >> froxy.log &
  froxy --local 5514 --remote 192.168.3.100:514
  froxy --local 127.0.0.1:8443 --remote 192.168.3.101:80
  froxy --local 127.0.0.1:8443 --remote https://example.com
  froxy --local *:8443 --remote https://example.com --user admin --pass admin

📭 Forward Proxy

Running a direct proxy on the server:

froxy --forward 8080 --user admin --pass admin

Forward proxy server running on port 8080
[14:58:18] Error authentication: 192.168.3.101:47156
[14:58:20] Connect: 192.168.3.101:47170 => kinozal.tv:443
[14:58:20] Disconnect: 192.168.3.101:47170
[14:58:35] Connect: 192.168.3.101:47522 => rutracker.org:443
[14:58:36] Disconnect: 192.168.3.101:47522

Sending requests on the client via proxy:

curl -x http://192.168.3.100:8080 --proxy-user adm:adm https://kinozal.tv/browse.php?s=the+rookie
curl -x http://192.168.3.100:8080 --proxy-user admin:admin https://kinozal.tv/browse.php?s=the+rookie
curl -x http://192.168.3.100:8080 --proxy-user admin:admin https://rutracker.org/forum/index.php

You can also run the proxy in daemon mode (background process) and pass the log output to a file:

froxy --forward 8080 --user admin --pass admin >> froxy.log & 

The syntax is the same for both systems (Linux and Windows). It is possible to launch multiple instances to process different requests in reverse proxy mode.

To stop all background processes in Windows:

Get-Process *froxy* | Stop-Process

Linux:

pkill froxy

🔌 TCP

In the example, accepts requests on the interface with IP address 192.168.3.100 and port 8443 to redirect to a remote host with IP address 192.168.3.101, where the application is running on port 80.

froxy --local 192.168.3.100:8443 --remote 192.168.3.101:80

TCP protocol is used
Listening on 192.168.3.100:8443 for forwarding to 192.168.3.101:80
[15:52:01] 192.168.3.100:37865: [::ffff:192.168.3.101]:80
[15:52:04] 192.168.3.100:37160: [::ffff:192.168.3.101]:80
[15:52:21] 192.168.3.99:35036: [::ffff:192.168.3.101]:80
[15:52:22] 192.168.3.99:35037: [::ffff:192.168.3.101]:80
[15:52:25] 192.168.3.99:35035: [::ffff:192.168.3.101]:80
[15:52:30] 192.168.3.100:37162: [::ffff:192.168.3.101]:80
[15:52:34] 192.168.3.100:38970: [::ffff:192.168.3.101]:80
[15:52:35] 192.168.3.100:37999: [::ffff:192.168.3.101]:80

💡 To listen to all network interfaces, use the * symbol instead of the local IP address (you need to run the console with administrator rights).

This method is suitable for processing most protocols that operate on the basis of TCP, including support for data transmission in the request body via HTTP.

But this method is not suitable for proxying requests to remote resources over the Internet.

$(Test-NetConnection 172.67.189.243 -Port 443).TcpTestSucceeded
True

froxy--local localhost:8443 --remote 172.67.189.243:443

TCP protocol is used
Error: An invalid IP address was specified.

To solve this problem, it is necessary to use proxying via the HTTP or HTTPS protocol.

🚧 SSH tunneling over TCP

Example ssh connection via proxy server:

froxy --local 192.168.3.100:3131 --remote 192.168.3.101:2121

On the client side, we connect to host 192.168.3.101, through a proxy with address 192.168.3.100:

ssh lifailon@192.168.3.100 -p 3131

📡 UDP

An example of forwarding requests from a client (the rsyslog client configuration on the right) via UDP (one @ character in the configuration) to the Visual Syslog server listening to requests on port 514 through a proxy server that listens for requests on port 5514.

💡 When using the UDP protocol, the local address is not specified.

froxy --local 5514 --remote 192.168.3.100:514

🌐 HTTP and HTTPS

When using proxying using the HTTP or HTTPS protocols, you must pass a url address that begins with the name of the protocol http:// or https://.

💡 Data transfer via GET and POST requests is supported.

In the example, the proxy server accepts requests on the interface with the IP address 192.168.3.100 on port 8443 to redirect to the remote url resource Kinozal. The connection is made from a client with the IP address 192.168.3.99 using the GET method. Lists all the endpoints that the client contacts to load the home page.

froxy --local 192.168.3.100:8443 --remote https://kinozal.tv

HTTP protocol is used
Listening on 192.168.3.100:8443 for forwarding to https://kinozal.tv
Not authorization is used
[16:03:43] 192.168.3.99 GET: /
[16:03:43] 192.168.3.99 GET: /pic/0_kinozal.tv.css?v=3.4
[16:03:43] 192.168.3.99 GET: /pic/jquery-3.6.3.min.js?v=1.1
[16:03:43] 192.168.3.99 GET: /pic/use.js?v=3.7
[16:03:43] 192.168.3.99 GET: /pic/logo3.gif
[16:03:43] 192.168.3.99 GET: /pic/emty.gif
[16:03:44] 192.168.3.99 GET: /pic/radio_ban.jpg
[16:03:44] 192.168.3.99 GET: /pic/knz_love.gif
[16:03:44] 192.168.3.99 GET: /i/poster/1/1/1718811.jpg
[16:03:44] 192.168.3.99 GET: /pic/cat/45.gif
[16:03:44] 192.168.3.99 GET: /pic/l_portiere.gif
[16:03:44] 192.168.3.99 GET: /pic/sbg.gif
[16:03:44] 192.168.3.99 GET: /pic/r_portiere.gif
[16:03:44] 192.168.3.99 GET: /pic/cat/17.gif
[16:03:44] 192.168.3.99 GET: /pic/dw2.png
[16:03:44] 192.168.3.99 GET: /pic/status_icons.png
[16:03:44] 192.168.3.99 GET: /pic/srch_l.png
[16:03:44] 192.168.3.99 GET: /pic/srch_r2.png
[16:03:44] 192.168.3.99 GET: /pic/flags_all.png?v=1
[16:03:44] 192.168.3.99 GET: /i/poster/4/1/1772641.jpg
[16:03:44] 192.168.3.99 GET: /i/poster/3/7/541437.jpg
[16:03:44] 192.168.3.99 GET: /pic/cat/11.gif
[16:03:44] 192.168.3.99 GET: /pic/cat/20.gif
[16:03:45] 192.168.3.99 GET: /i/poster/8/0/467680.jpg
[16:03:45] 192.168.3.99 GET: /i/poster/2/1/2040221.jpg
[16:03:45] 192.168.3.99 GET: /pic/cat/8.gif
[16:03:45] 192.168.3.99 GET: /pic/favicon.ico

Authorization on the site via POST request:

[16:05:19] 192.168.3.99 POST: /takelogin.php
[16:05:20] 192.168.3.99 GET: /pic/0_kinozal.tv.css?v=3.4
[16:05:20] 192.168.3.99 GET: /pic/ava_m.jpg
[16:05:20] 192.168.3.99 GET: /pic/logo3.gif
[16:05:20] 192.168.3.99 GET: /pic/use.js?v=3.7
[16:05:20] 192.168.3.99 GET: /pic/jquery-3.6.3.min.js?v=1.1
[16:05:21] 192.168.3.99 GET: /pic/minus.gif
[16:05:21] 192.168.3.99 GET: /pic/plus.gif
[16:05:21] 192.168.3.99 GET: /pic/r5.gif
[16:05:21] 192.168.3.99 GET: /pic/bnr_pay_sm.jpg
[16:05:21] 192.168.3.99 GET: /pic/emty.gif
[16:05:21] 192.168.3.99 GET: /pic/srch_l.png
[16:05:21] 192.168.3.99 GET: /pic/r_portiere.gif
[16:05:21] 192.168.3.99 GET: /pic/sbg.gif
[16:05:21] 192.168.3.99 GET: /pic/bgmn.gif
[16:05:21] 192.168.3.99 GET: /pic/srch_r2.png
[16:05:21] 192.168.3.99 GET: /pic/l_portiere.gif
[16:05:21] 192.168.3.99 GET: /pic/flags_all.png?v=1

🔓 Authorization

To use authorization on the proxy server side, you must fill in the appropriate parameters at startup. If the client transmits incorrect authorization data, this will be displayed in the log.

froxy --local 192.168.3.100:8443 --remote https://kinozal.tv --user proxy --pass admin

HTTP protocol is used
Listening on 192.168.3.100:8443 for forwarding to https://kinozal.tv
Authorization is used
[16:07:44] 192.168.3.100 GET: /
[16:07:44] 192.168.3.100 GET: Authorization form sent
[16:07:48] 192.168.3.100 GET: /
[16:07:48] 192.168.3.100 GET: Authorization error
[16:07:49] 192.168.3.100 GET: /
[16:07:49] 192.168.3.100 GET: Authorization form sent
[16:07:53] 192.168.3.100 GET: /
[16:07:54] 192.168.3.100 GET: /pic/0_kinozal.tv.css?v=3.4
[16:07:54] 192.168.3.100 GET: /pic/jquery-3.6.3.min.js?v=1.1
[16:07:54] 192.168.3.100 GET: /pic/use.js?v=3.7
[16:07:54] 192.168.3.100 GET: /pic/logo3.gif
[16:07:54] 192.168.3.100 GET: /pic/emty.gif
[16:07:55] 192.168.3.100 GET: /pic/radio_ban.jpg
[16:07:55] 192.168.3.100 GET: /pic/knz_love.gif
[16:07:55] 192.168.3.100 GET: /i/poster/1/1/1718811.jpg
[16:07:55] 192.168.3.100 GET: /pic/cat/45.gif
[16:07:55] 192.168.3.100 GET: /pic/dw2.png
[16:07:55] 192.168.3.100 GET: /pic/cat/17.gif
[16:07:55] 192.168.3.100 GET: /i/poster/4/1/1772641.jpg
[16:07:55] 192.168.3.100 GET: /i/poster/3/7/541437.jpg
[16:07:55] 192.168.3.100 GET: /pic/cat/11.gif
[16:07:55] 192.168.3.100 GET: /pic/cat/20.gif
[16:07:55] 192.168.3.100 GET: /i/poster/8/0/467680.jpg
[16:07:55] 192.168.3.100 GET: /i/poster/2/1/2040221.jpg
[16:07:55] 192.168.3.100 GET: /pic/cat/8.gif
[16:07:56] 192.168.3.100 GET: /pic/srch_l.png
[16:07:56] 192.168.3.100 GET: /pic/srch_r2.png
[16:07:56] 192.168.3.100 GET: /pic/l_portiere.gif
[16:07:56] 192.168.3.100 GET: /pic/r_portiere.gif
[16:07:56] 192.168.3.100 GET: /pic/sbg.gif
[16:07:56] 192.168.3.100 GET: /pic/status_icons.png
[16:07:56] 192.168.3.100 GET: /pic/flags_all.png?v=1
[16:07:57] 192.168.3.100 GET: /pic/favicon.ico

Other projects:

• 🧲 Kinozal bot - Telegram bot that allows you to automate the process of delivering content to your TV using only your phone. Provides a convenient interface for interacting with the torrent tracker Kinozal and the database TMDB to track the release date of episodes, seasons and search for actors for each episode , as well as the ability to manage the torrent client qBittorrent or Transmission on your computer, being remote from home and from single interface.

• ✨ TorAPI - unofficial API (backend) for torrent trackers RuTracker, Kinozal, RuTor and NoNameClub. Used for quick search of distributions, as well as obtaining torrent files, magnet links and detailed information about distribution by movie title, TV series or distribution ID, and also provides RSS news feed for all providers.

• 🔎 LibreKinopoisk - Google Chrome extension that adds buttons to the Kinopoisk website and provides a TorAPI interface in the Jackett style (without the need to install a server part and use a VPN) for quickly searching for movies and series in open sources.

• ❤️ WebTorrent Desktop api - fork of the WebTorrent Desktop client, which added a remote control mechanism via the REST API based on Express Framework.