Pepperdash.Essentials.Plugins.Display.Sony.Bravia 1.1.0-feature-4-series-properly.3

Sony Bravia Display Plugin

This is a plugin repo for Sony Bravia Displays. At this time the plugin only supports RS232 control.

Sony Bravia Display - RS232 API

RS232 Specification

Verify the RS232 via Serial Connection control is enabled. In testing, it was found the unit defaulted to RS232 via HDMI.

Set device to Normal Mode, do not put the device in Pro Mode or Pro Settings Mode. If they are put in either of the Pro modes requires Remote Commander out of Pro mode.

Essentials RS232 Device Configuration

{
    "key": "display-1",
    "name": "Display",
    "type": "sonybravia",
    "group": "display",
    "properties": {
        "control": {
            "method": "com",
            "controlPortDevKey": "processor",
            "controlPortNumber": 1,
            "comParams": {
                "protocol": "RS232",
                "baudRate": 9600,
                "dataBits": 8,
                "stopBits": 1,
                "parity": "None",
                "softwareHandshake": "None",
                "hardwareHandshake": "None",
                "pacing": 0
            }
        }
    }
}

Simple IP Specification

Essentials Simple IP Device Configuration

Simple IP control is currently under development

{
    "key": "display-1",
    "name": "Display",
    "type": "sonybravia",
    "group": "display",
    "properties": {
        "control": {
            "method": "tcpip",
            "tcpSshProperties": {
                "address": "",
                "port": 20060,
                "username": "",
                "password": "",
                "autoReconnect": true,
                "autoReconnectIntervalMs": 10000
            }                        
        }
    }
}

Device Bridging

Essentials Device Bridge Configuration

{
    "key": "plugin-bridge1",
    "uid": 39,
    "name": "Plugin Bridge",
    "group": "api",
    "type": "eiscApiAdvanced",
    "properties": {
        "control": {
            "tcpSshProperties": {
                "address": "127.0.0.2",
                "port": 0
            },
            "ipid": "B2",
            "method": "ipidTcp"
        },
        "devices": [
            {
                "deviceKey": "display-1",
                "joinStart": 1
            }
        ]
    }
}

Essentials Bridge Join Map

The join map below documents the commands implemented in this plugin.

Digitals

Analogs

Serials

DEVJSON Commands

When using DEVJSON commands update the program index devjson:{programIndex} and deviceKey values to match the testing environment.

devjson:1 {"deviceKey":"display-1", "methodName":"PowerOn", "params":[]}
devjson:1 {"deviceKey":"display-1", "methodName":"PowerOff", "params":[]}
devjson:1 {"deviceKey":"display-1", "methodName":"PowerToggle", "params":[]}
devjson:1 {"deviceKey":"display-1", "methodName":"PowerPoll", "params":[]}

Devjson:1 {"deviceKey":"display-1", "methodName":"ListRoutingInputPorts", "params": []}

devjson:1 {"deviceKey":"display-1", "methodName":"InputHdmi1", "params":[]}
devjson:1 {"deviceKey":"display-1", "methodName":"InputHdmi2", "params":[]}
devjson:1 {"deviceKey":"display-1", "methodName":"InputHdmi3", "params":[]}
devjson:1 {"deviceKey":"display-1", "methodName":"InputHdmi4", "params":[]}
devjson:1 {"deviceKey":"display-1", "methodName":"InputHdmi5", "params":[]}
devjson:1 {"deviceKey":"display-1", "methodName":"InputVideo1", "params":[]}
devjson:1 {"deviceKey":"display-1", "methodName":"InputVideo2", "params":[]}
devjson:1 {"deviceKey":"display-1", "methodName":"InputVideo3", "params":[]}
devjson:1 {"deviceKey":"display-1", "methodName":"InputComponent1", "params":[]}
devjson:1 {"deviceKey":"display-1", "methodName":"InputComponent2", "params":[]}
devjson:1 {"deviceKey":"display-1", "methodName":"InputComponent3", "params":[]}
devjson:1 {"deviceKey":"display-1", "methodName":"InputVga1", "params":[]}
devjson:1 {"deviceKey":"display-1", "methodName":"InputPoll", "params":[]}