MTConnect.NET-SHDR
6.4.7
dotnet add package MTConnect.NET-SHDR --version 6.4.7
NuGet\Install-Package MTConnect.NET-SHDR -Version 6.4.7
<PackageReference Include="MTConnect.NET-SHDR" Version="6.4.7" />
paket add MTConnect.NET-SHDR --version 6.4.7
#r "nuget: MTConnect.NET-SHDR, 6.4.7"
// Install MTConnect.NET-SHDR as a Cake Addin #addin nuget:?package=MTConnect.NET-SHDR&version=6.4.7 // Install MTConnect.NET-SHDR as a Cake Tool #tool nuget:?package=MTConnect.NET-SHDR&version=6.4.7
MTConnect.NET-SHDR
Classes to handle the SHDR Agent Adapter Protocol associated with the MTConnect Standard.
Overview
The ShdrAdapter classes handle the TCP connection to the Agent:
- ShdrAdapter : Sends the most recent values On-Demand using the SendChanged() method. This is used when full control of the communication is needed.
- ShdrIntervalAdapter : Sends the most recent values at the specified Interval. This is used when a set interval is adequate and the most recent value is all that is needed
- ShdrQueueAdapter : Queues all values that are sent from the PLC and sends them all on demand using the SendBuffer() method. This is used when all values are needed and full control of the communication is needed.
- ShdrIntervalQueueAdapter : Queues all values that are sent from the PLC and sends any queued values at the specified Interval. This is used when all values are needed but an interval is adequate.
SHDR conversion is handled in each individual class:
- ShdrDataItem : Handles converting Events and/or Samples with a Representation of VALUE to the appropriate SHDR format.
- ShdrCondition : Handles converting Conditions to the appropriate SHDR format
- ShdrTimeSeries : Handles converting Samples with a Representation of TIME_SERIES to the appropriate SHDR format
- ShdrDataSet : Handles converting Events and/or Samples with a Representation of DATA_SET to the appropriate SHDR format
- ShdrTable : Handles converting Events and/or Samples with a Representation of TABLE to the appropriate SHDR format
- ShdrAsset : Handles converting Assets to the appropriate SHDR format
The ShdrAdapterClient class handles the TCP connection to read from the Adapter and add data to an IMTConnectAgent class.
Usage
There are several different ways to setup and add data to the ShdrAdapter
ShdrAdapter
The example below creates a new ShdrAdapter. The added DataItem will be sent using the "adapter.SendChanged()" method
using MTConnect.Adapters.Shdr;
ShdrAdapter adapter = new ShdrAdapter();
adapter.Start();
adapter.AddDataItem("L2estop", "ARMED");
adapter.SendChanged();
SHDR Output
2023-01-26T16:48:17.0206852Z|L2estop|ARMED
ShdrAdapter (specific Port)
The example below creates a new ShdrAdapter on the 7980 TCP Port.
using MTConnect.Adapters.Shdr;
ShdrAdapter adapter = new ShdrAdapter(7980);
ShdrAdapter (specific Device)
The example below creates a new ShdrAdapter for the "OKUMA-Lathe" device. The added DataItem will be sent using the "adapter.SendChanged()" method
using MTConnect.Adapters.Shdr;
ShdrAdapter adapter = new ShdrAdapter("OKUMA-Lathe", 7980);
adapter.Start();
adapter.AddDataItem("L2estop", "ARMED");
adapter.SendChanged();
SHDR Output
2023-01-26T20:54:34.1694626Z|OKUMA-Lathe:L2estop|ARMED
ShdrAdapter (specific Device and Port)
The example below creates a new ShdrAdapter for the "OKUMA-Lathe" device on the 7980 TCP Port.
using MTConnect.Adapters.Shdr;
ShdrAdapter adapter = new ShdrAdapter("OKUMA-Lathe", 7980);
ShdrIntervalAdapter
The example below creates a new ShdrIntervalAdapter and sets the Interval to 500ms. Only the most recent DataItem with the ID = "L2estop" will be sent after 500ms has elapsed.
using MTConnect.Adapters.Shdr;
ShdrIntervalAdapter adapter = new ShdrIntervalAdapter(interval: 500);
adapter.Start();
adapter.AddDataItem("L2estop", "ARMED");
adapter.AddDataItem("L2estop", "TRIGGERED");
adapter.AddDataItem("L2estop", "ARMED");
adapter.AddDataItem("L2estop", "TRIGGERED");
SHDR Output
2023-01-26T17:22:10.3128693Z|L2estop|TRIGGERED
ShdrQueueAdapter
The example below creates a new ShdrQueueAdapter. All of the added DataItems will be sent using the "adapter.SendBuffer()" method
using MTConnect.Adapters.Shdr;
ShdrQueueAdapter adapter = new ShdrQueueAdapter();
adapter.Start();
adapter.AddDataItem("L2estop", "ARMED");
adapter.AddDataItem("L2estop", "TRIGGERED");
adapter.AddDataItem("L2estop", "ARMED");
adapter.AddDataItem("L2estop", "TRIGGERED");
adapter.SendBuffer();
SHDR Output
2023-01-26T17:22:10.2882160Z|L2estop|ARMED
2023-01-26T17:22:10.3125127Z|L2estop|TRIGGERED
2023-01-26T17:22:10.3128389Z|L2estop|ARMED
2023-01-26T17:22:10.3128693Z|L2estop|TRIGGERED
ShdrIntervalQueueAdapter
The example below creates a new ShdrIntervalQueueAdapter and sets the Interval to 500ms. All of the added DataItems will be sent after 500ms has elapsed.
using MTConnect.Adapters.Shdr;
ShdrIntervalQueueAdapter adapter = new ShdrIntervalQueueAdapter(interval: 500);
adapter.Start();
adapter.AddDataItem("L2estop", "ARMED");
adapter.AddDataItem("L2estop", "TRIGGERED");
adapter.AddDataItem("L2estop", "ARMED");
adapter.AddDataItem("L2estop", "TRIGGERED");
SHDR Output
2023-01-26T17:22:10.2882160Z|L2estop|ARMED
2023-01-26T17:22:10.3125127Z|L2estop|TRIGGERED
2023-01-26T17:22:10.3128389Z|L2estop|ARMED
2023-01-26T17:22:10.3128693Z|L2estop|TRIGGERED
Configuration
Id
- Get a unique identifier for the AdapterDeviceKey
- The Name or UUID of the Device to create a connection forPort
- The TCP Port used for communicationHeartbeat
- The heartbeat used to maintain a connection between the Adapter and the AgentConnectionTimeout
- The amount of time (in milliseconds) to allow for a connection attempt to the AgentReconnectInterval
- The amount of time (in milliseconds) between adapter reconnection attemptsMultilineAssets
- Use multiline AssetsMultilineDevices
- Sets the default for Converting Units when adding ObservationsFilterDuplicates
- Determines whether to filter out duplicate dataOutputTimestamps
- Determines whether to output Timestamps for each SHDR line
OutputTimestamps
Timestamps may be output in the SHDR protocol in order to pass the timestamp from the Adapter instead of allowing the Agent to apply a timestamp.
OutputTimestamp = true
2023-01-27T03:47:53.4477372Z|L2estop|ARMED
OutputTimestamp = false
L2estop|ARMED
Sending Data
Add DataItems Individually
// DataItemId and CDATA
adapter.AddDataItem("L2estop", "ARMED");
// DataItemId and CDATA, and Timestamp
adapter.AddDataItem("L2estop", "ARMED", DateTime.UtcNow);
// DataItemId and CDATA as ShdrDataItem
adapter.AddDataItem(new ShdrDataItem("L2estop", "ARMED"));
// DataItemId, CDATA, and Timestamp as ShdrDataItem
adapter.AddDataItem(new ShdrDataItem("L2estop", "ARMED", DateTime.UtcNow));
If no timestamp is given then the timestamp will be set when the DataItem is sent to the Agent. To insure that all dataitems have the same timestamp, it can be set explicitly.
Add List of DataItems
var ts = DateTime.UtcNow;
var dataItems = new List<ShdrDataItem>();
dataItems.Add(new ShdrDataItem("L2p1execution", "READY", ts));
dataItems.Add(new ShdrDataItem("L2p1Fovr", 100, ts));
dataItems.Add(new ShdrDataItem("L2p1partcount", 15, ts));
dataItems.Add(new ShdrDataItem("L2p1Fact", 250, ts));
adapter.AddDataItems(dataItems);
Output
2023-01-26T20:50:53.6161001Z|L2p1execution|READY|L2p1Fovr|100|L2p1partcount|15|L2p1Fact|250
Store DataItems in Variables
ShdrDataItem executionDataItem = new ShdrDataItem("L2p1execution");
ShdrDataItem feedrateOverrideDataItem = new ShdrDataItem("L2p1Fovr");
ShdrDataItem partCountDataItem = new ShdrDataItem("L2p1partcount");
ShdrDataItem feedrateActualDataItem = new ShdrDataItem("L2p1Fact");
executionDataItem.Value = "READY";
feedrateOverrideDataItem.Value = 100;
partCountDataItem.Value = 15;
feedrateActualDataItem.Value = 250;
adapter.AddDataItem(executionDataItem);
adapter.AddDataItem(feedrateOverrideDataItem);
adapter.AddDataItem(partCountDataItem);
adapter.AddDataItem(feedrateActualDataItem);
Send DataItem Manually
DataItems can be added to the Adapter and immediately send to the Agent using the "SendDataItem()" method
adapter.SendDataItem("L2estop", "ARMED");
Conditions
The ShdrCondition class is used to send MTConnect Condition data using the 5 primary values Level, NativeCode, NativeSeverity, Qualifier, and Message (referred to as Result in the MTConnect Standard). A Condition is made up of 1 or more FaultStates. Each FaultState is represented by the ShdrFaultState class.
Add a Fault Condition
ShdrCondition condition = new ShdrCondition("L2p1system", ConditionLevel.FAULT);
adapter.AddCondition(condition);
A Condition can also be added by using the built-in functions:
Set the Condition to Normal
ShdrCondition condition = new ShdrCondition("L2p1system");
condition.Normal();
adapter.AddCondition(condition);
Set the Condition to Warning
ShdrCondition condition = new ShdrCondition("L2p1system");
condition.Warning("Not Found", "404", "100", ConditionQualifier.LOW);
adapter.AddCondition(condition);
Set the Condition to Fault
ShdrCondition condition = new ShdrCondition("L2p1system");
condition.Fault("Internal Error", "500", "10254", ConditionQualifier.HIGH);
adapter.AddCondition(condition);
Set multiple FaultStates
ShdrCondition condition = new ShdrCondition("L2p1coolant");
condition.AddWarning("Coolant Level Low", "47321", qualifier: ConditionQualifier.LOW);
condition.AddWarning("Coolant Temperature High", "98712", qualifier: ConditionQualifier.HIGH);
adapter.AddCondition(condition);
Set the Condition to Unavailable
ShdrCondition condition = new ShdrCondition("L2p1system");
condition.Unavailable();
adapter.AddCondition(condition);
Add FaultStates Individually
ShdrCondition condition = new ShdrCondition("L2p1system");
ShdrFaultState faultState = new ShdrFaultState();
faultState.NativeCode = "404";
faultState.NativeSeverity = "100";
faultState.Qualifier = "LOW";
faultState.Message = "Testing from new adapter";
condition.AddFaultState(faultState);
adapter.AddCondition(condition);
Send Condition Manually
Conditions can be added to the Adapter and immediately send to the Agent using the "SendCondition()" method
adapter.SendCondition(condition);
TimeSeries
List<double> samples = new List<double>();
samples.Add(12);
samples.Add(15);
samples.Add(14);
samples.Add(18);
samples.Add(25);
samples.Add(30);
ShdrTimeSeries timeSeries = new ShdrTimeSeries("L2p1Sensor", samples, 100);
adapter.AddTimeSeries(timeSeries);
Output
2023-01-26T20:39:28.1540686Z|L2p1Sensor|6|100|12 15 14 18 25 30
Send TimeSeries Manually
TimeSeries can be added to the Adapter and immediately send to the Agent using the "SendTimeSeries()" method
adapter.SendTimeSeries(timeSeries);
DataSets
List<DataSetEntry> dataSetEntries = new List<DataSetEntry>();
dataSetEntries.Add(new DataSetEntry("V1", 5));
dataSetEntries.Add(new DataSetEntry("V2", 205));
ShdrDataSet dataSet = new ShdrDataSet("L2p1Variables", dataSetEntries);
adapter.AddDataSet(dataSet);
Output
2023-01-26T20:40:30.6718334Z|L2p1Variables|V1=5 V2=205
Send DataSets Manually
DataSets can be added to the Adapter and immediately send to the Agent using the "SendDataSets()" method
adapter.SendDataSets(dataSet);
Tables
List<TableEntry> tableEntries = new List<TableEntry>();
// Tool 1
List<TableCell> t1Cells = new List<TableCell>();
t1Cells.Add(new TableCell("LENGTH", 7.123));
t1Cells.Add(new TableCell("DIAMETER", 0.494));
t1Cells.Add(new TableCell("REMAINING_LIFE", 35));
tableEntries.Add(new TableEntry("T1", t1Cells));
// Tool 2
List<TableCell> t2Cells = new List<TableCell>();
t2Cells.Add(new TableCell("LENGTH", 10.456));
t2Cells.Add(new TableCell("DIAMETER", 0.125));
t2Cells.Add(new TableCell("REMAINING_LIFE", 100));
tableEntries.Add(new TableEntry("T2", t2Cells));
// Tool 3
List<TableCell> t3Cells = new List<TableCell>();
t3Cells.Add(new TableCell("LENGTH", 6.251));
t3Cells.Add(new TableCell("DIAMETER", 1.249));
t3Cells.Add(new TableCell("REMAINING_LIFE", 93));
tableEntries.Add(new TableEntry("T3", t3Cells));
ShdrTable table = new ShdrTable("L2p1ToolTable", tableEntries);
adapter.AddTable(table);
Output
2023-01-26T20:40:55.8702675Z|L2p1ToolTable|T1={LENGTH=7.123 DIAMETER=0.494 TOOL_LIFE=0.35} T2={LENGTH=10.456 DIAMETER=0.125 TOOL_LIFE=1} T3={LENGTH=6.251 DIAMETER=1.249 TOOL_LIFE=0.93}
Send Tables Manually
Tables can be added to the Adapter and immediately send to the Agent using the "SendTables()" method
adapter.SendTables(table);
Assets
MTConnect Assets are sent by first defining the Asset using the appropriate class (CuttingToolAsset, FileAsset, etc.) then using the "AddAsset()".
CuttingTool Asset
using MTConnect.Assets.CuttingTools;
using MTConnect.Assets.CuttingTools.Measurements;
var tool = new CuttingToolAsset();
tool.AssetId = "5.12";
tool.ToolId = "12";
tool.CuttingToolLifeCycle = new CuttingToolLifeCycle
{
Location = new Location { Type = LocationType.SPINDLE },
ProgramToolNumber = "12",
ProgramToolGroup = "5"
};
tool.CuttingToolLifeCycle.Measurements.Add(new FunctionalLengthMeasurement(7.6543));
tool.CuttingToolLifeCycle.Measurements.Add(new CuttingDiameterMaxMeasurement(0.375));
tool.CuttingToolLifeCycle.CuttingItems.Add(new CuttingItem
{
ItemId = "12.1",
Locus = CuttingItemLocas.FLUTE.ToString()
});
tool.CuttingToolLifeCycle.CutterStatus.Add(CutterStatus.AVAILABLE);
tool.CuttingToolLifeCycle.CutterStatus.Add(CutterStatus.NEW);
tool.CuttingToolLifeCycle.CutterStatus.Add(CutterStatus.MEASURED);
tool.DateTime = DateTime.Now;
adapter.AddAsset(tool);
Output (with MultilineAssets = true)
2023-01-26T17:56:59.9694353Z|@ASSET@|5.12|CuttingTool|--multiline--W5XZBJ2QZV
<CuttingTool assetId="5.12" timestamp="2023-01-26T12:56:59.4778578-05:00" toolId="12">
<CuttingToolLifeCycle>
<CutterStatus>
<Status>AVAILABLE</Status>
<Status>NEW</Status>
<Status>MEASURED</Status>
</CutterStatus>
<Location type="SPINDLE">0</Location>
<ProgramToolGroup>5</ProgramToolGroup>
<ProgramToolNumber>12</ProgramToolNumber>
<Measurements>
<FunctionalLength units="MILLIMETER" code="LF">7.6543</FunctionalLength>
<CuttingDiameterMax units="MILLIMETER" code="DC">0.375</CuttingDiameterMax>
</Measurements>
<CuttingItems count="1">
<CuttingItem itemId="12.1">
<Locus>FLUTE</Locus>
</CuttingItem>
</CuttingItems>
</CuttingToolLifeCycle>
</CuttingTool>
--multiline--W5XZBJ2QZV
File Asset
using MTConnect.Assets.Files;
var file = new FileAsset();
file.DateTime = DateTime.UtcNow;
file.AssetId = "file.test";
file.Size = 12346;
file.VersionId = "test-v1";
file.State = FileState.PRODUCTION;
file.Name = "file-123.txt";
file.MediaType = "text/plain";
file.ApplicationCategory = ApplicationCategory.DEVICE;
file.ApplicationType = ApplicationType.DATA;
file.FileLocation = new FileLocation(@"C:\temp\file-123.txt");
file.CreationTime = DateTime.Now;
adapter.AddAsset(file);
Output (with MultilineAssets = true)
2023-01-26T18:01:50.3085245Z|@ASSET@|file.test|File|--multiline--6UH71Y7IYW
<File assetId="file.test" timestamp="2023-01-26T18:01:49.9929867Z" name="file-123.txt" mediaType="text/plain" applicationCategory="DEVICE" applicationType="DATA" size="12346" versionId="test-v1" state="PRODUCTION">
<FileLocation href="C:\temp\file-123.txt" />
<CreationTime>2023-01-26T13:01:49.9939538-05:00</CreationTime>
</File>
--multiline--6UH71Y7IYW
Add Multiple Assets
using MTConnect.Assets.CuttingTools;
using MTConnect.Assets.CuttingTools.Measurements;
using MTConnect.Assets.Files;
var assets = new List<IAsset>();
// Add the Cutting Tool Asset to the "assets" list variable
var tool = new CuttingToolAsset();
tool.AssetId = "5.12";
tool.ToolId = "12";
tool.CuttingToolLifeCycle = new CuttingToolLifeCycle
{
Location = new Location { Type = LocationType.SPINDLE },
ProgramToolNumber = "12",
ProgramToolGroup = "5"
};
tool.CuttingToolLifeCycle.Measurements.Add(new FunctionalLengthMeasurement(7.6543));
tool.CuttingToolLifeCycle.Measurements.Add(new CuttingDiameterMaxMeasurement(0.375));
tool.CuttingToolLifeCycle.CuttingItems.Add(new CuttingItem
{
ItemId = "12.1",
Locus = CuttingItemLocas.FLUTE.ToString()
});
tool.CuttingToolLifeCycle.CutterStatus.Add(CutterStatus.AVAILABLE);
tool.CuttingToolLifeCycle.CutterStatus.Add(CutterStatus.NEW);
tool.CuttingToolLifeCycle.CutterStatus.Add(CutterStatus.MEASURED);
tool.DateTime = DateTime.Now;
assets.Add(tool);
// Add the File Asset to the "assets" list variable
var file = new FileAsset();
file.DateTime = DateTime.UtcNow;
file.AssetId = "file.test";
file.Size = 12346;
file.VersionId = "test-v1";
file.State = FileState.PRODUCTION;
file.Name = "file-123.txt";
file.MediaType = "text/plain";
file.ApplicationCategory = ApplicationCategory.DEVICE;
file.ApplicationType = ApplicationType.DATA;
file.FileLocation = new FileLocation(@"C:\temp\file-123.txt");
file.CreationTime = DateTime.Now;
assets.Add(file);
adapter.AddAssets(assets);
Send Asset Manually
Assets can be added to the Adapter and immediately send to the Agent using the "SendAsset()" method
using MTConnect.Assets.Files;
var file = new FileAsset();
// ..
// ..
// ..
adapter.SendAsset(file);
Remove Individual Asset by AssetId
adapter.RemoveAsset("file.test");
Output
2023-01-26T18:21:57.8208518Z|@REMOVE_ASSET@|file.test
Remove All Assets of a specified Type
adapter.RemoveAllAssets("File");
Output
2023-01-26T18:31:23.6664032Z|@REMOVE_ALL_ASSETS@|File
SHDR Conversion
Conversion to and from an SHDR message is done through methods in the ShdrDataItem, ShdrCondition, ShdrTimeSeries, ShdrDataSet, and ShdrTable classes. Each class overrides the base "ToString()" method and also contains a "FromString()" method. The "ToString()" method creates an SHDR compatible string from the object and the "FromString()" creates an object from an SHDR string.
ShdrDataItem.ToString()
ShdrDataItem availableDataItem = new ShdrDataItem("L2avail", Availability.AVAILABLE, DateTime.UtcNow);
Console.WriteLine(availableDataItem);
2022-02-01T13:53:03.6940000Z|L2avail|AVAILABLE
ShdrCondition.ToString()
ShdrCondition condition = new ShdrCondition("L2p1system", ConditionLevel.FAULT, DateTime.UtcNow);
condition.NativeCode = "404";
condition.NativeSeverity = "100";
condition.Qualifier = "LOW";
condition.Message = "Testing from new adapter";
Console.WriteLine(condition);
2022-02-01T13:55:11.8460000Z|L2p1system|FAULT|404|100|LOW|Testing from new adapter
ShdrTimeSeries.ToString()
List<double> samples = new List<double>();
samples.Add(12);
samples.Add(15);
samples.Add(14);
samples.Add(18);
samples.Add(25);
samples.Add(30);
ShdrTimeSeries timeSeries = new ShdrTimeSeries("L2p1Sensor", samples, 100, DateTime.UtcNow);
Console.WriteLine(timeSeries);
2022-02-01T13:56:58.7700000Z|L2p1Sensor|6|100|12 15 14 18 25 30
ShdrDataSet.ToString()
List<DataSetEntry> dataSetEntries = new List<DataSetEntry>();
dataSetEntries.Add(new DataSetEntry("V1", 5));
dataSetEntries.Add(new DataSetEntry("V2", 205));
ShdrDataSet dataSet = new ShdrDataSet("L2p1Variables", dataSetEntries, DateTime.UtcNow);
Console.WriteLine(dataSet);
2022-02-01T13:58:31.8150000Z|L2p1Variables|V1=5 V2=205
ShdrTable.ToString()
List<TableEntry> tableEntries = new List<TableEntry>();
// Tool 1
List<TableCell> t1Cells = new List<TableCell>();
t1Cells.Add(new TableCell("LENGTH", 7.123));
t1Cells.Add(new TableCell("DIAMETER", 0.494));
t1Cells.Add(new TableCell("TOOL_LIFE", 0.35));
tableEntries.Add(new TableEntry("T1", t1Cells));
// Tool 2
List<TableCell> t2Cells = new List<TableCell>();
t2Cells.Add(new TableCell("LENGTH", 10.456));
t2Cells.Add(new TableCell("DIAMETER", 0.125));
t2Cells.Add(new TableCell("TOOL_LIFE", 1));
tableEntries.Add(new TableEntry("T2", t2Cells));
// Tool 3
List<TableCell> t3Cells = new List<TableCell>();
t3Cells.Add(new TableCell("LENGTH", 6.251));
t3Cells.Add(new TableCell("DIAMETER", 1.249));
t3Cells.Add(new TableCell("TOOL_LIFE", 0.93));
tableEntries.Add(new TableEntry("T3", t3Cells));
ShdrTable table = new ShdrTable("L2p1ToolTable", tableEntries, DateTime.UtcNow);
Console.WriteLine(table);
2022-02-01T13:59:47.5980000Z|L2p1ToolTable|T1={LENGTH=7.123 DIAMETER=0.494 TOOL_LIFE=0.35} T2={LENGTH=10.456 DIAMETER=0.125 TOOL_LIFE=1} T3={LENGTH=6.251 DIAMETER=1.249 TOOL_LIFE=0.93}
Product | Versions Compatible and additional computed target framework versions. |
---|---|
.NET | net5.0 was computed. net5.0-windows was computed. net6.0 is compatible. net6.0-android was computed. net6.0-ios was computed. net6.0-maccatalyst was computed. net6.0-macos was computed. net6.0-tvos was computed. net6.0-windows was computed. net7.0 is compatible. net7.0-android was computed. net7.0-ios was computed. net7.0-maccatalyst was computed. net7.0-macos was computed. net7.0-tvos was computed. net7.0-windows was computed. net8.0 is compatible. net8.0-android was computed. net8.0-browser was computed. net8.0-ios was computed. net8.0-maccatalyst was computed. net8.0-macos was computed. net8.0-tvos was computed. net8.0-windows was computed. |
.NET Core | netcoreapp2.0 was computed. netcoreapp2.1 was computed. netcoreapp2.2 was computed. netcoreapp3.0 was computed. netcoreapp3.1 was computed. |
.NET Standard | netstandard2.0 is compatible. netstandard2.1 was computed. |
.NET Framework | net461 is compatible. net462 is compatible. net463 was computed. net47 is compatible. net471 is compatible. net472 is compatible. net48 is compatible. net481 was computed. |
MonoAndroid | monoandroid was computed. |
MonoMac | monomac was computed. |
MonoTouch | monotouch was computed. |
Tizen | tizen40 was computed. tizen60 was computed. |
Xamarin.iOS | xamarinios was computed. |
Xamarin.Mac | xamarinmac was computed. |
Xamarin.TVOS | xamarintvos was computed. |
Xamarin.WatchOS | xamarinwatchos was computed. |
-
.NETFramework 4.6.1
- MTConnect.NET-HTTP (>= 6.4.7)
- MTConnect.NET-XML (>= 6.4.7)
-
.NETFramework 4.6.2
- MTConnect.NET-HTTP (>= 6.4.7)
- MTConnect.NET-XML (>= 6.4.7)
-
.NETFramework 4.7
- MTConnect.NET-HTTP (>= 6.4.7)
- MTConnect.NET-XML (>= 6.4.7)
-
.NETFramework 4.7.1
- MTConnect.NET-HTTP (>= 6.4.7)
- MTConnect.NET-XML (>= 6.4.7)
-
.NETFramework 4.7.2
- MTConnect.NET-HTTP (>= 6.4.7)
- MTConnect.NET-XML (>= 6.4.7)
-
.NETFramework 4.8
- MTConnect.NET-HTTP (>= 6.4.7)
- MTConnect.NET-XML (>= 6.4.7)
-
.NETStandard 2.0
- MTConnect.NET-HTTP (>= 6.4.7)
- MTConnect.NET-XML (>= 6.4.7)
-
net6.0
- MTConnect.NET-HTTP (>= 6.4.7)
- MTConnect.NET-XML (>= 6.4.7)
-
net7.0
- MTConnect.NET-HTTP (>= 6.4.7)
- MTConnect.NET-XML (>= 6.4.7)
-
net8.0
- MTConnect.NET-HTTP (>= 6.4.7)
- MTConnect.NET-XML (>= 6.4.7)
NuGet packages (6)
Showing the top 5 NuGet packages that depend on MTConnect.NET-SHDR:
Package | Downloads |
---|---|
MTConnect.NET
MTConnect.NET is a fully featured .NET library for MTConnect Agents, Adapters, and Clients. Supports MTConnect Versions up to 2.3. Supports .NET Framework 4.6.1 up to .NET 8 |
|
MTConnect.NET-Applications-Adapters-SHDR
MTConnect.NET-Applications-Adapters-SHDR contains classes to fully implement an MTConnect SHDR Adapter application. Supports MTConnect Versions up to 2.1. Supports .NET Framework 4.6.1 up to .NET 7 |
|
MTConnect.NET-AgentModule-ShdrAdapter
MTConnect.NET-AgentModule-ShdrAdapter implements the SHDR protocol for use with the MTConnectAgentApplication class in the MTConnect.NET-Applications-Agents library. Supports MTConnect Versions up to 2.2. Supports .NET Framework 4.6.1 up to .NET 8 |
|
MTConnect.NET-AdapterModule-SHDR
MTConnect.NET-AdapterModule-SHDR implements the MTConnect SHDR Protocol for Adapter Applications. Supports MTConnect Versions up to 2.3. Supports .NET Framework 4.6.1 up to .NET 8 |
|
MTConnect.NET-AgentModule-HttpServer
MTConnect.NET-AgentModule-HttpServer implements a server for the MTConnect HTTP REST Protocol for use with the MTConnectAgentApplication class in the MTConnect.NET-Applications-Agents library. Supports MTConnect Versions up to 2.3. Supports .NET Framework 4.6.1 up to .NET 8 |
GitHub repositories
This package is not used by any popular GitHub repositories.
Version | Downloads | Last updated |
---|---|---|
6.4.7 | 559 | 8/21/2024 |
6.4.6 | 479 | 8/7/2024 |
6.4.5 | 235 | 8/2/2024 |
6.4.4 | 440 | 7/16/2024 |
6.4.3 | 463 | 6/14/2024 |
6.4.2 | 312 | 6/12/2024 |
6.4.1 | 502 | 5/17/2024 |
6.4.0 | 285 | 5/14/2024 |
6.3.2-beta | 243 | 5/2/2024 |
6.3.1-beta | 330 | 4/24/2024 |
6.3.0-beta | 218 | 4/17/2024 |
6.2.2-beta | 263 | 4/5/2024 |
6.2.1-beta | 280 | 4/3/2024 |
6.2.0-beta | 258 | 3/27/2024 |
6.1.3-beta | 286 | 3/15/2024 |
6.1.2-beta | 263 | 3/15/2024 |
6.0.11-beta | 493 | 2/2/2024 |
6.0.10-beta | 445 | 1/26/2024 |
6.0.9-beta | 535 | 12/28/2023 |
6.0.8-beta | 494 | 12/27/2023 |
6.0.7-beta | 533 | 12/19/2023 |
6.0.5-beta | 602 | 12/14/2023 |
6.0.3-beta | 605 | 12/12/2023 |
6.0.1-beta | 688 | 12/7/2023 |
5.4.4 | 4,343 | 6/6/2023 |
5.4.3 | 2,551 | 5/20/2023 |
5.4.1 | 1,673 | 3/28/2023 |
5.4.0 | 1,724 | 3/20/2023 |
5.3.0 | 1,461 | 3/14/2023 |
5.2.0 | 1,569 | 3/5/2023 |
5.1.0 | 1,616 | 3/3/2023 |
5.0.0 | 3,510 | 2/3/2023 |
4.6.0 | 1,522 | 11/28/2022 |
4.5.0 | 1,660 | 10/18/2022 |
4.4.0 | 1,571 | 10/5/2022 |
4.3.0 | 1,594 | 9/20/2022 |
4.2.0 | 1,508 | 9/13/2022 |
4.1.0 | 1,496 | 8/30/2022 |
4.0.0 | 1,489 | 8/26/2022 |
3.4.2 | 2,022 | 6/20/2022 |
3.4.1 | 1,421 | 6/17/2022 |
3.4.0 | 1,254 | 6/16/2022 |
3.3.1 | 1,727 | 4/27/2022 |
3.3.0 | 1,291 | 4/13/2022 |
3.2.0 | 1,420 | 3/29/2022 |