MoreAsyncLINQ 0.8.0
dotnet add package MoreAsyncLINQ version 0.8.0
NuGet\InstallPackage MoreAsyncLINQ Version 0.8.0
<PackageReference Include="MoreAsyncLINQ" Version="0.8.0" />
paket add MoreAsyncLINQ version 0.8.0
#r "nuget: MoreAsyncLINQ, 0.8.0"
// Install MoreAsyncLINQ as a Cake Addin
#addin nuget:?package=MoreAsyncLINQ&version=0.8.0
// Install MoreAsyncLINQ as a Cake Tool
#tool nuget:?package=MoreAsyncLINQ&version=0.8.0
MoreAsyncLINQ
Additional async LINQ
to objects operators for IAsyncEnumerable<T>
It's like MoreLINQ, only asynchronous.
Operators
Acquire
Ensures that a source sequence of disposable objects are all acquired successfully. If the acquisition of any one fails then those successfully acquired till that point are disposed.
Aggregate
Applies multiple accumulators sequentially in a single pass over a sequence.
AggregateRight
Applies a rightassociative accumulator function over a sequence.
This operator is the rightassociative version of the Aggregate
operator.
Assert
Asserts that all elements of a sequence meet a given condition otherwise throws an exception.
AssertCount
Asserts that a source sequence contains a given count of elements.
AtLeast
Determines whether or not the number of elements in the sequence is greater than or equal to the given integer.
AtMost
Determines whether or not the number of elements in the sequence is lesser than or equal to the given integer.
Backsert
Inserts the elements of a sequence into another sequence at a specified index from the tail of the sequence, where zero always represents the last position, one represents the secondlast element, two represents the thirdlast element and so on.
Batch
Batches the source sequence into sized buckets.
Cartesian
Returns the Cartesian product of two or more sequences by combining each element from the sequences and applying a userdefined projection to the set.
Choose
Applies a function to each element of the source sequence and returns a new
sequence of result elements for source elements where the function returns a
couple (2tuple) having a true
as its first element and result as the
second.
CompareCount
Compares two sequences and returns an integer that indicates whether the first sequence has fewer, the same or more elements than the second sequence.
Consume
Completely consumes the given sequence. This method uses immediate execution, and doesn't store any data during execution
CountBetween
Determines whether or not the number of elements in the sequence is between an inclusive range of minimum and maximum integers.
CountBy
Applies a keygenerating function to each element of a sequence and returns a sequence of unique keys and their number of occurrences in the original sequence.
CountDown
Provides a countdown counter for a given count of elements at the tail of the sequence where zero always represents the last element, one represents the secondlast element, two represents the thirdlast element and so on.
DistinctBy
Returns all distinct elements of the given source, where "distinctness" is determined via a projection and the default equality comparer for the projected type.
EndsWith
Determines whether the end of the first sequence is equivalent to the second sequence.
EquiZip
Returns a projection of tuples, where each tuple contains the Nth element from each of the argument sequences. An exception is thrown if the input sequences are of different lengths.
Evaluate
Returns a sequence containing the values resulting from invoking (in order) each function in the source sequence of functions.
Exactly
Determines whether or not the number of elements in the sequence is equals to the given integer.
ExceptBy
Returns the set of elements in the first sequence which aren't in the second sequence, according to a given key selector.
Exclude
Excludes elements from a sequence starting at a given index
FallbackIfEmpty
Returns the elements of a sequence and falls back to another if the original sequence is empty.
FillBackward
Returns a sequence with each null reference or value in the source replaced with the following nonnull reference or value in that sequence.
FillForward
Returns a sequence with each null reference or value in the source replaced with the previous nonnull reference or value seen in that sequence.
Flatten
Flattens a sequence containing arbitrarilynested sequences.
Fold
Returns the result of applying a function to a sequence with 1 to 16 elements.
ForEach
Immediately executes the given action on each element in the source sequence.
From
Returns a sequence containing the values resulting from invoking (in order) each function in the source sequence of functions.
FullGroupJoin
Performs a Full Group Join between the and sequences.
FullJoin
Performs a full outer join between two sequences.
Generate
Returns a sequence of values consecutively generated by a generator function
GenerateByIndex
Returns a sequence of values based on indexes
GroupAdjacent
Groups the adjacent elements of a sequence according to a specified key selector function.
Index
Returns a sequence of tuples of an element and its zerobased index in the source sequence.
IndexBy
Applies a keygenerating function to each element of a sequence and returns a sequence that contains the elements of the original sequence as well its key and index inside the group of its key. An additional argument specifies a comparer to use for testing equivalence of keys.
Insert
Inserts the elements of a sequence into another sequence at a specified index.
Interleave
Interleaves the elements of two or more sequences into a single sequence, skipping sequences as they are consumed.
Lag
Produces a projection of a sequence by evaluating pairs of elements separated by a negative offset.
Lead
Produces a projection of a sequence by evaluating pairs of elements separated by a positive offset.
LeftJoin
Performs a left outer join between two sequences.
MaxBy
Returns the maxima (maximal elements) of the given sequence, based on the given projection.
MinBy
Returns the minima (minimal elements) of the given sequence, based on the given projection.
Move
Returns a sequence with a range of elements in the source sequence moved to a new offset.
OrderBy
Sorts the elements of a sequence in a particular direction (ascending, descending) according to a key.
OrderedMerge
Merges two ordered sequences into one. Where the elements equal in both sequences, the element from the first sequence is returned in the resulting sequence.
Pad
Pads a sequence with default values if it is narrower (shorter in length) than a given width.
PadStart
Pads a sequence with default values in the beginning if it is narrower (shorter in length) than a given width.
Pairwise
Returns a sequence resulting from applying a function to each element in the source sequence and its predecessor, with the exception of the first element which is only returned as the predecessor of the second element
PartialSort
Combines OrderBy
(where element is key) and Take
in a single operation.
PartialSortBy
Combines OrderBy
and Take
in a single operation.
Partition
Partitions a sequence by a predicate, or a grouping by Boolean keys or up to 3 sets of keys.
Pipe
Executes the given action on each element in the source sequence and yields it
PreScan
Performs a prescan (exclusive prefix sum) on a sequence of elements
Rank
Ranks each item in the sequence in descending ordering using a default comparer.
RankBy
Ranks each item in the sequence in descending ordering by a specified key using a default comparer.
Repeat
Repeats the sequence indefinitely or a specific number of times.
RightJoin
Performs a right outer join between two sequences.
RunLengthEncode
Runlength encodes a sequence by converting consecutive instances of the same element into a tuple representing the item and its occurrence count.
Scan
Performs a scan (inclusive prefix sum) on a sequence of elements.
ScanBy
Applies an accumulator function over sequence element keys, returning the keys along with intermediate accumulator states.
ScanRight
Performs a rightassociative scan (inclusive prefix) on a sequence of elements. This operator is the rightassociative version of the Scan operator.
Segment
Divides a sequence into multiple sequences by using a segment detector based on the original sequence.
SkipLast
Bypasses a specified number of elements at the end of the sequence.
SkipUntil
Skips items from the input sequence until the given predicate returns true when applied to the current source item; that item will be the last skipped
Slice
Extracts elements from a sequence at a particular zerobased starting index
SortedMerge
Merges two or more sequences that are in a common order (either ascending or descending) into a single sequence that preserves that order.
Split
Splits the source sequence by a separator.
StartsWith
Determines whether the beginning of the first sequence is equivalent to the second sequence.
TagFirstLast
Returns a sequence resulting from applying a function to each element in the source sequence with additional parameters indicating whether the element is the first and/or last of the sequence
TakeEvery
Returns every Nth element of a source sequence
TakeLast
Returns a specified number of contiguous elements from the end of a sequence
TakeUntil
Returns items from the input sequence until the given predicate returns true when applied to the current source item; that item will be the last returned
ThenBy
Performs a subsequent ordering of elements in a sequence in a particular direction (ascending, descending) according to a key.
ToArrayByIndex
Creates an array from an IAsyncEnumerable<T>
where a function is used to determine
the index at which an element will be placed in the array.
ToDelimitedString
Creates a delimited string from a sequence of values. The delimiter used depends on the current culture of the executing thread.
ToDictionary
Creates a dictionary from a sequence of keyvalue pair elements or tuples of 2.
ToLookup
Creates a lookup from a sequence of keyvalue pair elements or tuples of 2.
Trace
Traces the elements of a source sequence for diagnostics.
Transpose
Transposes the rows of a sequence into columns.
TraverseBreadthFirst
Traverses a tree in a breadthfirst fashion, starting at a root node and using a userdefined function to get the children at each node of the tree.
TraverseDepthFirst
Traverses a tree in a depthfirst fashion, starting at a root node and using a userdefined function to get the children at each node of the tree.
Unfold
Returns a sequence generated by applying a state to the generator function, and from its result, determines if the sequence should have a next element and its value, and the next state in the recursive call.
Window
Processes a sequence into a series of subsequences representing a windowed subset of the original
WindowLeft
Creates a leftaligned sliding window over the source sequence of a given size.
WindowRight
Creates a rightaligned sliding window over the source sequence of a given size.
ZipLongest
Returns a projection of tuples, where each tuple contains the Nth element from each of the argument sequences. The resulting sequence will always be as long as the longest of input sequences where the default value of each of the shorter sequence element types is used for padding.
ZipShortest
Returns a projection of tuples, where each tuple contains the Nth element from each of the argument sequences. The resulting sequence is as short as the shortest input sequence.
Credit: This project and its documentation are derived from MoreLINQ
Product  Versions Compatible and additional computed target framework versions. 

.NET  net5.0 was computed. net5.0windows was computed. net6.0 was computed. net6.0android was computed. net6.0ios was computed. net6.0maccatalyst was computed. net6.0macos was computed. net6.0tvos was computed. net6.0windows was computed. net7.0 was computed. net7.0android was computed. net7.0ios was computed. net7.0maccatalyst was computed. net7.0macos was computed. net7.0tvos was computed. net7.0windows was computed. net8.0 was computed. net8.0android was computed. net8.0ios was computed. net8.0maccatalyst was computed. net8.0macos was computed. net8.0tvos was computed. net8.0windows was computed. 
.NET Core  netcoreapp2.0 was computed. netcoreapp2.1 was computed. netcoreapp2.2 was computed. netcoreapp3.0 was computed. netcoreapp3.1 was computed. 
.NET Standard  netstandard2.0 is compatible. netstandard2.1 is compatible. 
.NET Framework  net461 is compatible. net462 was computed. net463 was computed. net47 was computed. net471 was computed. net472 was computed. net48 was computed. net481 was computed. 
MonoAndroid  monoandroid was computed. 
MonoMac  monomac was computed. 
MonoTouch  monotouch was computed. 
Tizen  tizen40 was computed. tizen60 was computed. 
Xamarin.iOS  xamarinios was computed. 
Xamarin.Mac  xamarinmac was computed. 
Xamarin.TVOS  xamarintvos was computed. 
Xamarin.WatchOS  xamarinwatchos was computed. 

.NETFramework 4.6.1
 System.Linq.Async (>= 5.0.0)
 System.ValueTuple (>= 4.5.0)

.NETStandard 2.0
 System.Linq.Async (>= 5.0.0)

.NETStandard 2.1
 System.Linq.Async (>= 5.0.0)
NuGet packages (1)
Showing the top 1 NuGet packages that depend on MoreAsyncLINQ:
Package  Downloads 

MongoAsyncEnumerableAdapter
Provides an adapter from MongoDB's IAsyncCursor and IAsyncCursorSource to IAsyncEnumerable 
GitHub repositories
This package is not used by any popular GitHub repositories.
Removes: Append, Prepend.