PosInformatique.Moq.Analyzers 1.9.2

Prefix Reserved

There is a newer version of this package available.
See the version list below for details.

dotnet add package PosInformatique.Moq.Analyzers --version 1.9.2

NuGet\Install-Package PosInformatique.Moq.Analyzers -Version 1.9.2

This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package.

<PackageReference Include="PosInformatique.Moq.Analyzers" Version="1.9.2">
  <PrivateAssets>all</PrivateAssets>
  <IncludeAssets>runtime; build; native; contentfiles; analyzers</IncludeAssets>
</PackageReference>

For projects that support PackageReference, copy this XML node into the project file to reference the package.

paket add PosInformatique.Moq.Analyzers --version 1.9.2

The NuGet Team does not provide support for this client. Please contact its maintainers for support.

#r "nuget: PosInformatique.Moq.Analyzers, 1.9.2"

#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package.

// Install PosInformatique.Moq.Analyzers as a Cake Addin
#addin nuget:?package=PosInformatique.Moq.Analyzers&version=1.9.2

// Install PosInformatique.Moq.Analyzers as a Cake Tool
#tool nuget:?package=PosInformatique.Moq.Analyzers&version=1.9.2

The NuGet Team does not provide support for this client. Please contact its maintainers for support.

PosInformatique.Moq.Analyzers

PosInformatique.Moq.Analyzers is a library to verify syntax and code design when writing the unit tests using the Moq library.

Installing from NuGet

The PosInformatique.Moq.Analyzers library is available directly on the official website.

To download and install the library to your Visual Studio unit test projects use the following NuGet command line

Install-Package PosInformatique.Moq.Analyzers

The analyzer is automatically added and activated with their default severity levels.

Rules

This section describes the list of the rules analyzed by the library to improve code quality of the unit tests using the Moq library.

Design

Design rules used to make your unit tests more strongly strict.

Rule	Description
PosInfoMoq1000: `VerifyAll()` methods should be called when instantiate a `Mock<T>` instances	When instantiating a `Mock<T>` in the Arrange phase of an unit test, `VerifyAll()` method should be called in the Assert phase to check the setup methods has been called.
PosInfoMoq1001: The mocked instances behaviors should be defined to `Strict` mode	When instantiating a `Mock<T>` instance, the `MockBehavior` of the `Mock` instance should be defined to `Strict`.
PosInfoMoq1002: `Verify()` methods should be called when `Verifiable()` has been setup	When a mocked member has been setup with the `Verifiable()` method, the `Verify()` method must be called at the end of the unit test.
PosInfoMoq1003: The `Callback()` method should be used to check the parameters when mocking a method with `It.IsAny<T>()` arguments	When a mocked method contains a `It.IsAny<T>()` argument, the related parameter should be checked in the `Callback()` method.
PosInfoMoq1004: The `Callback()` parameter should not be ignored if it has been setup as an `It.IsAny<T>()` argument	When a mocked method contains a `It.IsAny<T>()` argument, the related parameter should not be ignored in the `Callback()` method.

Compilation

Compilation rules check some error during the compilation to be sure that the execution of the unit tests with Mock<T> will not raise exceptions. All the rules of this category should not be disabled (or changed their severity differently of Error).

Rule	Description
PosInfoMoq2000: The `Returns()` or `ReturnsAsync()` methods must be call for Strict mocks	When a `Mock<T>` has been defined with the `Strict` behavior, the `Returns()` or `ReturnsAsync()` method must be called when setup a method to mock which returns a value.
PosInfoMoq2001: The `Setup()` method must be used only on overridable members)	The `Setup()` method must be applied only for overridable members.
PosInfoMoq2002: `Mock<T>` class can be used only to mock non-sealed class	The `Mock<T>` class can mock only interfaces or non-`sealed` classes.
PosInfoMoq2003: The `Callback()` delegate expression must match the signature of the mocked method	The delegate in the argument of the `Callback()` method must match the signature of the mocked method.
PosInfoMoq2004: Constructor arguments cannot be passed for interface mocks	No arguments can be passed to a mocked interface.
PosInfoMoq2005: Constructor arguments must match the constructors of the mocked class	When instantiating a `Mock<T>`, the parameters must match one of the constructors of the mocked type.
PosInfoMoq2006: The Protected().Setup() method must be use with overridable protected or internal methods	When using the `Protected().Setup()` configuration, the method mocked must be overridable and protected or internal.
PosInfoMoq2007: The `As<T>()` method can be used only with interfaces.	The `As<T>()` can only be use with the interfaces.
PosInfoMoq2008: The `Verify()` method must be used only on overridable members)	The `Verify()` method must be applied only for overridable members.
PosInfoMoq2009: `Mock.Of<T>` method must be used only to mock non-sealed class	The `Mock.Of<T>` method can mock only interfaces or non-`sealed` classes
PosInfoMoq2010: `Mock.Of<T>` method must be used only with types that contains parameterless contructor	The `Mock.Of<T>` method requires a non-private parameterless contructor
PosInfoMoq2011: Constructor of the mocked class must be accessible.	The constructor of the instantiate mocked class must non-private.

There are no supported framework assets in this package.

Learn more about Target Frameworks and .NET Standard.

This package has no dependencies.

NuGet packages

This package is not used by any NuGet packages.

GitHub repositories

This package is not used by any popular GitHub repositories.

Version	Downloads	Last updated
1.11.0	253	10/28/2024
1.10.0	384	9/2/2024
1.9.3	161	8/19/2024
1.9.2	106	8/6/2024
1.9.1	148	7/17/2024
1.8.0	123	7/3/2024
1.7.0	106	6/28/2024
1.6.0	96	6/24/2024
1.5.0	122	6/10/2024
1.4.0	631	2/26/2024
1.3.0	350	12/5/2023
1.2.0	267	11/7/2023
1.1.0	205	11/7/2023
1.0.0	228	11/1/2023

1.9.2
     - Fix the PosInfoMoq1003 to raise warnings when using InSequence() method.
     - Fix the PosInfoMoq2003 to raise errors when using InSequence() method.

     1.9.1
     - Add new rules:
       - PosInfoMoq2009: Mock.Of<T> method must be used only to mock non-sealed class
       - PosInfoMoq2010: Mock.Of<T> method must be used only with types that contains parameterless contructor
       - PosInfoMoq2011: Constructor of the mocked class must be accessible.
     - Fix the PosInfoMoq1001 to check the MockBehavior usage to strict.

     1.8.0
     - Add new rules:
       - PosInfoMoq1003: The Callback() method should be used to check the parameters when mocking a method with It.IsAny<T>() arguments.
       - PosInfoMoq1004: The Callback() parameter should not be ignored if it has been setup as an It.IsAny<T>() argument.

     1.7.0
     - Add new rules:
       - PosInfoMoq1002: Verify() methods should be called when Verifiable() has been setup.
     - Fix the PosInfoMoq1000 rule to check only the call to VerifyAll() method.
     - Fix a bug when developer use custom Setup() method when using Moq.

     1.6.0
     - Add new rules:
       - PosInfoMoq2007: The As<T>() method can be used only with interfaces.
       - PosInfoMoq2008: The Verify() method must be used only on overridable members
     - Add the support of static methods VerifyAll() and Verify() for the PosInfoMoq2000 rule.
     - Various optimizations to increase speed of analysis.
     - Various optimizations to reduce memory usage.
     - Add hyperlink to the documentation of the r

     1.5.0
     - Add new rules:
       - PosInfoMoq2004: Check that constructor arguments can not be passed to a mocked interface.
       - PosInfoMoq2005: Check the constructors arguments passed to mocked class.
       - PosInfoMoq2006: Check that the setup method with Protected() exists, are overridable and is protected or internal.
     - Fix the PosInfoMoq2000 rule to not raise an error when the Returns()/ReturnsAsync() in invalided by the compiler.
     - Fix the PosInfoMoq2001 rule to raise error when Setup() is defined to chained members calls which are not overridable.

     1.4.0
     - Reduce the dependency of Microsoft.CodeAnalysis.CSharp to the release 4.0.1.

     1.3.0
     - Add new rules:
       - PosInfoMoq2003: Check the Callback() signature method (fixes #3).
     - Fixes the PosInfoMoq2000 rule to check the call of the Returns()/ReturnsAsync() methods for the mocked properties for the mock with Strict behavior.

     1.2.0
     - Add new rules:
       - PosInfoMoq2001: The Setup() method must be used only on overridable members.
       - PosInfoMoq2002: Mock<T> class can be used only to mock non-sealed class.

     1.1.0
     - Add new rules:
       - PosInfoMoq2000: The Returns() or ReturnsAsync() methods must be call for Strict mocks.

     1.0.0
     - Initial version with the followings rules:
       - PosInfoMoq1000: Verify() and VerifyAll() methods should be called when instantiate a Mock<T> instances
       - PosInfoMoq1001: The Mock<T> instance behavior should be defined to Strict mode.